Capsule-free fluid delivery and beam-induced electrodeposition in a scanning electron microscope

Gold coated borosilicate nanocapillaries are used to locally deliver aqueous, electrolytic CuSO4 solution into the low vacuum chamber of an environmental scanning electron microscope (ESEM). Capillary flow of the liquid is induced by bringing a nanocapillary into contact with a substrate. A microscopic droplet is stabilized by controlling the droplet evaporation rate with the substrate temperature and the pressure of H2O vapor injected into the vacuum chamber. An electron beam is admitted to the droplet through a pressure limiting aperture. Electrochemical reduction of aqueous Cu2+ to solid, high purity, deposited Cu is achieved by biasing the nanocapillary and supplying current by the beam which acts as a virtual cathode and enables electrodeposition on both conductive and insulating substrates. Delivery of liquids into vacuum enables localized, capsule-free beam induced electrochemistry, opening new pathways for direct-write nano and micro-lithography via beam induced electrodeposition. © The Royal Society of Chemistry 2013

Deposition of highly porous nanocrystalline platinum on functionalized substrates through fluorine-induced decomposition of Pt(PF<inf>3</inf>) <inf>4</inf> adsorbates

Nanocrystalline platinum is synthesized at room temperature by co-injecting Pt(PF3)4 and XeF2 vapors onto solid supports in vacuum. The Pt nucleation time scales with chemisorbed fluorine coverage, which is controlled by pre-dosing supports with XeF2, and by optional electron or ion beam irradiation under flowing XeF2. The latter is used to increase the chemisorbed fluorine coverage and localize the Pt growth process. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Magnetotransport properties of iron microwires fabricated by focused electron beam induced autocatalytic growth

We have prepared iron microwires in a combination of focused electron beam induced deposition (FEBID) and autocatalytic growth from the iron pentacarbonyl, Fe(CO)5, precursor gas under UHV conditions. The electrical transport properties of the microwires were investigated and it was found that the temperature dependence of the longitudinal resistivity (rhoxx) shows a typical metallic behaviour with a room temperature value of about 88 micro{\Omega} cm. In order to investigate the magnetotransport properties we have measured the isothermal Hall-resistivities in the range between 4.2 K and 260 K. From these measurements positive values for the ordinary and the anomalous Hall coefficients were derived. The relation between anomalous Hall resistivity (rhoAN) and longitudinal resistivity is quadratic, rhoAN rho^2 xx, revealing an intrinsic origin of the anomalous Hall effect. Finally, at low temperature in the transversal geometry a negative magnetoresistance of about 0.2 % was measured

Spontaneous Growth of Gallium-Filled Microcapillaries on Ion-Bombarded GaN

Bottom-up growth of microscopic pillars is observed at room temperature on GaN irradiated with a Ga+ beam in a gaseous XeF2 environment. Ion bombardment produces Ga droplets which evolve into pillars, each comprised of a spherical Ga cap atop a Ga-fille

Maskless milling of diamond by a focused oxygen ion beam

Recent advances in focused ion beam technology have enabled high-resolution, maskless nanofabrication using light ions. Studies with light ions to date have, however, focused on milling of materials where sub-surface ion beam damage does not inhibit device performance. Here we report on maskless milling of single crystal diamond using a focused beam of oxygen ions. Material quality is assessed by Raman and luminescence analysis, and reveals that the damage layer generated by oxygen ions can be removed by non-intrusive post-processing methods such as localised electron beam induced chemical etching

Direct-write milling of diamond by a focused oxygen ion beam

Recent advances in focused ion beam technology have enabled high-resolution, direct-write nanofabrication using light ions. Studies with light ions to date have, however, focused on milling of materials where sub-surface ion beam damage does not inhibit device performance. Here we report on direct-write milling of single crystal diamond using a focused beam of oxygen ions. Material quality is assessed by Raman and luminescence analysis, and reveals that the damage layer generated by oxygen ions can be removed by nonintrusive post-processing methods such as localised electron beam induced chemical etching

Explaining Africa’s public consumption procyclicality : revisiting old evidence

This paper compiles a novel dataset of time-varying measures of government consumption cyclicality for a panel of 46 African economies between 1960 and 2014. Government consumption has, generally, been highly procyclical over time in this group of countries. However, sample averages hide serious heterogeneity across countries with the majority of them showing procyclical behavior despite some positive signs of graduation from the “procyclicality trap” in a few cases. By means of weighted least squares regressions, we find that more developed African economies tend to have a smaller degree of government consumption procyclicality. Countries with higher social fragmentation and those are more reliant on foreign aid inflows tend to have a more procyclical government consumption policy. Better governance promotes counter- cyclical fiscal policy whileincreased democracy dampens it. Finally, some fiscal rules are important in curbing the procyclical behavior of government consumption.info:eu-repo/semantics/publishedVersio

Analysis of a spatial gene expression database for sea anemone Nematostella vectensis during early development

International audienceThe spatial distribution of many genes has been visualized during the embryonic development in the starlet sea anemone Nematostella vectensis in the last decade. In situ hybridization images are available in the Kahi Kai gene expression database, and a method has been developed to quantify spatial gene expression patterns of N. vectensis. In this paper, gene expression quantification is performed on a wide range of gene expression patterns from this database and descriptions of observed expression domains are stored in a separate database for further analysis

Towards a single step process to create high purity gold structures by electron beam induced deposition at room temperature

Highly pure metallic structures can be deposited by electron beam induced deposition and they have many important applications in different fields. The organo-metallic precursor is decomposed and deposited under the electron beam, and typically it is purified with post-irradiation in presence of O2. However, this approach limits the purification to the surface of the deposit. Therefore, 'in situ' purification during deposition using simultaneous flows of both O2 and precursor in parallel with two gas injector needles has been tested and verified. To simplify the practical arrangements, a special concentric nozzle has been designed allowing deposition and purification performed together in a single step. With this new device metallic structures with high purity can be obtained more easily, while there is no limit on the height of the structures within a practical time frame. In this work, we summarize the first results obtained for 'in situ' Au purification using this concentric nozzle, which is described in more detail, including flow simulations. The operational parameter space is explored in order to optimize the shape as well as the purity of the deposits, which are evaluated through scanning electron microscope and energy dispersive x-ray spectroscopy measurements, respectively. The observed variations are interpreted in relation to other variables, such as the deposition yield. The resistivity of purified lines is also measured, and the influence of additional post treatments as a last purification step is studied.EMPA is acknowledged for providing the original code for the GIS simulator model, which was extended by Stan de Muijnck (TU Delft) with the new geometry. Pleun Dona (FEI) is acknowledged for helping in the design of the concentric nozzle and in getting a working prototype. Patricia Peinado is also acknowledged for help on experimental activities. This work was supported by NanoNextNL program, a Dutch national research and technology program for micro- and nano-technology